Declaration Of Conformity For Atex Machinery - ProMinent Sigma 3 Basic Operating Instructions Manual

25

Declaration of Conformity for ATEX Machinery

For pumps with explosion protection:
Tab. 19: Extract from the Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed com‐
plies with the provisions of the Machine Directive.
EX-designation:
Assess the ignition risk when combining the pump and motor.
Date:
Declaration of Conformity for ATEX Machinery
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the Directive, on the basis of its
functional concept and design and in the version distributed by us. Tech‐
nical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump without motor, Sigma product range
Design for use in areas at risk of explosion in accordance with the ATEX Direc‐
tive (2014/34/EC)
S3Ba _ _ _ _ _ _ _ _ _ _ _ _ _ _ § A _ _
with characteristics
§ = "1" or "2" or "3"
see nameplate on the unit
ATEX Directive (2014/34/EU)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EN ISO 80079-36:2016,
EN ISO 80079-37:2016,
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
II 2G Ex h IIC T4 Gb X
X: max. medium temperature 90 °C
Ambient temperature -10 °C ... + 40 °C
16.11.2018
* With regard to "Special conditions" - refer also to the "Safety chapter" -
"Safety information for ATEX designs" - "Special conditions for ATEX".
You can download the Declaration of Conformity from www.promi‐
nent.com.
The Declarations of Conformity, the EC type-examination certificates and
the operating instructions for the individual components are also enclosed
with the pump.
97