Eu Declaration Of Incorporation For Machinery - ProMinent Hydro/4 HP4a Operating Instructions Manual

EU Declaration of Incorporation for Machinery

18 EU Declaration of Incorporation for Machinery
For pumps without explosion protection:
Tab. 10: Extract from the EU Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed corre‐
sponds to the provisions of the Machine Directive.
Date:
104
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us. Technical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump without motor, product range Hydro 4
HP4a _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
with characteristics
§ = "0" or "1" or "3" or "4"
see nameplate on the device
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
20.04.2016
You can download the Declaration of Incorporation at www.promi‐
nent.com.