To Display The Screen Indicators - Display Function - Sony CCD-TRV118 Service Manual

Playing back a tape
To display the screen indicators – Display function
Press DISPLAY on the Remote Commander.
Press DISPLAY on your camcorder.
The indicators appear on the screen.
To make the indicators disappear, press DISPLAY again.
About data code
Use the Remote Commander for this operation.
Your camcorder automatically records not only pictures on the tape but also the data
code (date/time or various settings when recorded).
1 Set the POWER switch to VCR, then play back a tape.
2 Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time t various settings t no indicator
JUL 4 2003
12:05:56 PM
[a]: Time code/Tape counter
[b]: SteadyShot off
[c]: Exposure mode
[d]: White balance
[e]: Gain
[f]: Shutter speed
[g]: Aperture value
DATA CODE
DISPLAY
Date/time
50
0:00:23:01
min
DISPLAY
Various settings
50
0:00:23:01
min
AUTO
60 AWB
F1.6 9dB
[a]
[b]
[c]
[d]
[e]
[f]
[g]
47