Mounting The Device On To The Outer Rails - Avaya Scopia Elite 6000 MCU Series Rack Mounting Manual

Setting up the Device
3. Repeat all steps to mount the outer rails to the other side of the rack.
4. Continue with
Related links
Mounting the Device on to the Rack

Mounting the Device on to the Outer Rails

About this task
After you have attached the outer rails to the rack to form a support for the device, you can attach
the inner rail extensions to the device and mount the device on to the rack.
Caution:
To prevent injury and equipment damage, follow the lifting guidelines described in the Safety
Guide when lifting or moving the device.
Before you begin
• Read the safety guidelines described in the Safety Guide.
• Attach the outer rails to the rack, as described in
page 20.
• Make sure you have the following items, which were shipped with the device and are used to
mount the rails to the rack
the rails on page 25):
- Two inner rail extensions
January 2017
Figure 17: Side view of rack with the outer rail attached
Mounting the Device on to the Outer Rails
on page 17
(Figure 18: Preparing the parts required to mount the device onto
Rack Mounting Guide for Avaya Scopia Elite 6000 MCU
Comments on this document? infodev@avaya.com
on page 24.
Mounting the Outer Rails on to the Rack on
24