Avaya Scopia Elite 6000 MCU Series Rack Mounting Manual page 27

Important:
To pull out the device, you need to slide the long part of the latch on each side
simultaneously to release the safety lock. Slide the right latch up and slide the left latch
down (Figure 22: Removing the device from the rails
3. Secure the device to each front post using a long screw. Insert a washer between the screw
and the device panel.
This secures the front panel to the front of the rack and the outer rail to the rack.
The outer rail was already secured in
January 2017
Figure 22: Removing the device from the rails
Mounting the Outer Rails on to the Rack
Rack Mounting Guide for Avaya Scopia Elite 6000 MCU
Comments on this document? infodev@avaya.com
Mounting the Device on to the Rack
on page 27).
on page 20.
27