Attaching The System Ground - Avaya Scopia Elite 6000 MCU Series Rack Mounting Manual

Setting up the Device
Related links
Mounting the Device on to the Rack

Attaching the System Ground

Important:
WARNING - Before connecting power to the device or turning it on, provide it with an adequate
connection to a grounding point at the site. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available on the site.
The MCU grounding stud is located on the rear panel.The grounding equipment is user supplied.
Make sure to use an18 AWG (1 mm
length of the grounding wire depends on the MCU location or on the site environment.
Related links
Setting up the Device
January 2017
Figure 23: Securing the front panel of the device to the front post
on page 17
2
) or larger grounding wire and appropriate grounding lug. The
on page 14
Rack Mounting Guide for Avaya Scopia Elite 6000 MCU
Comments on this document? infodev@avaya.com
28