Avaya Scopia Elite 6000 MCU Series Rack Mounting Manual page 21

Mounting the Device on to the Rack
Figure 12: Preparing the parts required to mount the rails
Procedure
1. Connect the long and short outer rails to each other by sliding the knob on the short rail
through the rounded end of the slot on the long rail (Figure 13: Connecting the two outer
rails on page 21).
Figure 13: Connecting the two outer rails
January 2017 Rack Mounting Guide for Avaya Scopia Elite 6000 MCU 21
Comments on this document? infodev@avaya.com