Avaya Scopia Elite 6000 MCU Series Rack Mounting Manual page 26

Setting up the Device
c. Repeat these steps on the other side of the device.
2. Slide the device on to the rails until the holes on the device front panel align with the front
post (see Figure 21: Sliding the device onto the rails
As you slide, you should hear two clicks; one mid-way and one near the end. These are the
safety latches to stop the device from accidentally sliding out.
Figure 21: Sliding the device onto the rails
January 2017
Figure 20: Securing rail extensions to the device
Rack Mounting Guide for Avaya Scopia Elite 6000 MCU
Comments on this document? infodev@avaya.com
on page 26).
26