Mounting The Device On To The Outer Rails - Avaya scopia elite 6000 series Installation Manual

3. Repeat all steps to mount the outer rails to the other side of the rack.
4. Continue with
Related links
Mounting the Device on to the Rack
Preparing the Rack and Rails for Mounting the Device

Mounting the Device on to the Outer Rails

Mounting the Device on to the Outer Rails
About this task
After you have attached the outer rails to the rack to form a support for the device, you can attach
the inner rail extensions to the device and mount the device on to the rack.
Caution:
To prevent injury and equipment damage, follow the lifting guidelines described in the Safety
Guide when lifting or moving the device.
Before you begin
• Read the safety guidelines described in the Safety Guide.
• Attach the outer rails to the rack, as described in
page 33.
February 2016
Figure 16: Side view of rack with the outer rail attached
Mounting the Device on to the Outer Rails
on page 30
on page 37
®
Avaya Scopia Elite 6000 Series MCU Installation Guide
Comments on this document? infodev@avaya.com
Mounting the Device on to the Rack
on page 37.
on page 30
Mounting the Outer Rails on to the Rack on
37