Avaya Scopia Elite 6000 MCU Series Rack Mounting Manual page 23

c. Secure the rail by inserting a long screw and a washer through the rear rack post only
(Figure 16: Securing the rail to the rack
long screw and the rail, as shown below.
The rail is secured to the front of the rack only after the device is mounted, as described
in Mounting the Device on to the Outer Rails
The outer rail is now attached to the rack, as shown in
the outer rail attached
January 2017
Figure 16: Securing the rail to the rack
on page 24.
Rack Mounting Guide for Avaya Scopia Elite 6000 MCU
Comments on this document? infodev@avaya.com
Mounting the Device on to the Rack
on page 23). Insert the washer between the
on page 24.
Figure 17: Side view of rack with
23