Operating; Operating Via The Local Display; Display Views; Access Control - Siemens SITRANS F Series Operating Instructions Manual

Operating

These Operating Instructions describe the operation via the local display (HMI). The device can
also be operated via various software.
7.1

Operating via the local display

7.1.1

Display views

There are six display views, all fully configurable. Use the
the display views.
Multiple types of views are available:
● Display of measured process values, see Reading the process values (Page 74).
● Display for totalizer operation, see Operating the totalizers (Page 76).
● Display for multipoint calibration, see Operating the totalizers (Page 76).
● Display of a list of active alarms, see Handling alarms (Page 77).
● Display of six configurable diagnostic values, see Reading the diagnostic values (Page 79).
7.1.2

Access control

You can view all items in the HMI menu but the parameters are protected against changes
through access level control. To gain access, select one of the following access levels:
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD
and the keys to switch between
7
71