Commissioning
6.6 Commissioning via local display
● Inputs and outputs wizard (Page 62)
● Communication wizard (wizard) (Page 68)
Each sub-wizard has its own view numbering. The sub-wizard name and the parameter name
are shown in the upper left corner of the display. The view number and the total views in the sub-
wizard are shown in the upper right corner of the display.
6.6.1.2
Sensor settings wizard
The Sensor settings wizard will guide you through configuration of essential parameters.
Sensor settings (1)
Units settings
No
Pipe settings
Text
Unit settings
Unit settings
56
Yes
Units settings
Options/Description
Select "Yes" to configure the display units.
Set the display units of length, temperature, pressure, kinematic viscosity,
and density.
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD