9.5
Check sensor specific data
9.5.1
Verify sensor diagnostic parameters (A3)
Verify sensor diagnostic parameters (A3)
The diagnostic values of the sensor are shown in the default HMI diagnostic view. The HMI
provides six configurable measurement/diagnostic values that are updated dynamically.
Figure 9-3
Additional diagnostics can be found in the sensor diagnostics menu: Maintenance and
Diagnostic
login) can also be viewed to provide greater insight into application and/or setup issues.
Figure 9-4
A more comprehensive list of DSL error codes is available when it becomes necessary to call
a Siemens service personnel for low level troubleshooting.
Figure 9-5
Note
Diagnostic and process values may also be checked using PDM.
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD
6 value diagnostic screen views
Diagnostics
Sensor. Here the Path states and Receiver signals (with user
Sensor diagnostic screen with ideal Receiver signal shown
Detailed DSL error codes for advanced troubleshooting with Siemens service
Diagnostics and troubleshooting
9.5 Check sensor specific data
97