Process Values Wizard - Siemens SITRANS F Series Operating Instructions Manual

Commissioning
6.6 Commissioning via local display
Sensor settings (5)
Path settings
No
Finished
Text
Path settings
Installed paths
Save settings
Start measurement
Path geometry
Mounting path 1
Path 1
6.6.1.3

Process values wizard

The Process values wizard will guide you through setup of process values for your application.
The prioritizing of the process values automatically configures the measurement views on the
display. The process value configured as first process value is set as first display view.
60
Yes
Installed paths
Save settings
*
Start measurement
Path geometry
Mounting path 1
**
Path 1
Options/Description
Select "YES" to configure the path(s).
Select the paths installed.
Moves to the next menu item.
* for each installed path. Select the path to configure.
Define the geometry of the path (direct or reflect mode)
Represents the spacing offset. Use Nom for most applications.
Select "Receiver signal" to view graphical display of the receiver signal.
** Select "Next" to configure next path or to select "Next" to finish the
wizard.
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD