Extron electronics Quantum Ultra User Manual page 12

• Output overlap for edge-blended applications — Output overlap feature supports
edge-blended applications by providing redundant image data for the projection
system's blended regions.
• Mullion compensation for flat-panel displays — Adjustable compensation
extends the displayed image "behind" screen bezels, accurately presenting sources
which span multiple displays.
• HDCP compliance — Ensures display of content-protected media and
interoperability with other HDCP-compliant devices.
• SpeedSwitch Technology — Delivers virtually instantaneous switching speeds for
HDCP-encrypted content.
User-selectable HDCP authorization — Allows individual inputs to appear HDCP
•
compliant or non-HDCP compliant to the connected source, which is beneficial if the
source automatically encrypts all content when connected to an HDCP-compliant
device. Protected material is not passed in non-HDCP mode.
• HDCP Visual Confirmation — When HDCP-encrypted content is transmitted to a
non-HDCP compliant display, a green window with an alert message is sent to the
display for immediate visual confirmation that protected content cannot be viewed on
that display.
Picture controls — Controls are provided for brightness, contrast, detail, horizontal
•
and vertical sizing, horizontal and vertical positioning, zoom, and overscan.
• Internal video test patterns for calibration and setup — Quantum Ultra offers
several dynamically-generated video test patterns to facilitate proper system setup
and calibration of display devices.
Supports direct decoding of H.264 streams for presentation on the videowall
•
(IN SMD 100 card) — Eliminates the need for external decoders, reducing system
cost and complexity.
Compatible with common industry streaming formats, including H.264,
•
MPEG-2, MPEG-4, and Motion JPEG (IN SMD 100 card).
Decodes a wide range of streamed resolutions up to 1080p/60 (IN SMD 100
•
card) — Users can opt to decode more streams at lower resolutions or fewer
streams at higher resolutions, allowing efficient use of network and processing
bandwidth.
• Supports the video sections of ONVIF Profile S (IN SMD 100 card) —
Compatible with a wide variety of H.264 encoders, IP cameras, media encoders, and
other streaming devices that also support ONVIF Profile S.
• Independently-configurable network connections (IN SMD 100 card) — This
allows decoding resources to be shared within the same subnet or split across
multiple subnets, providing increased flexibility when designing complex streaming
networks.
Transmits up to four outputs at distances up to 330 feet (100 meters) over
•
a shielded CATx cable (OUT4DTP card) — Reduces system complexity when
output extension is required for driving videowall displays up to 330' (100 m) away
from the Quantum Ultra processor.
• Selectable DTP, XTP matrix, and HDBaseT output modes (OUT4DTP card) —
Allows selection of the type of twisted pair technology best suited for the application.
• Power insertion enables remote powering of DTP receivers (OUT4DTP
card) — 12 V DC insertion at the OUT4DTP output card enables the DTP receivers
to be powered over the twisted pair connections, eliminating the need for separate
power supplies at the remote units. Requires one PS 124 per OUT4DTP card.
Quantum Ultra Videowall Processing System • Introduction 4