Extron electronics Quantum Ultra User Manual page 77

b.
In the
IP Address
and select the
Pull from Hardware
c. Click . The connection information for the device is displayed in the
Add
panel (see
Devices
NOTE: A unit added this way is not shown in the
3. Edit IP address settings for your device as needed.
a. In the
Select Device(s) to Add
Figure 60. Editing a Device IP Address
b. The
Communication Settings
address and edit other IP settings as desired.
To enable Dynamic Host Configuration Protocol (DHCP), select the
checkbox. When this box is selected, an available IP address is assigned
automatically to the Quantum when it is connected to a supporting network.
(When this box is selected, all other IP settings fields become read-only.)
If you added this device manually, click the
button (shown at right) on the taskbar. On the
screen, click the
Communication Settings
figure 61, ) to display the
1
box.
Figure 61. Device Details Screen
For detailed instructions on using VCS to configure the videowall, see the VCS Help File.
Quantum Ultra Videowall Processing System • Remote Configuration and Control
field, enter the address of the Quantum Ultra to be connected
radio button.
figure 58, , on the previous page).
4
panel, click the
dialog box opens. In this window, enter a new IP
Device Settings
Device Details
button (see
Communication Settings
System
panel.
Select Devices to Add
button (see figure 60,
Edit
DHCP
dialog
).
1
69