Front Panel Operation; Front Panel Features - Extron electronics StudioStation 100 User Manual

Front Panel
Operation
This section of the manual discusses the StudioStation 100 front panel and operations.
Topics covered include:
•
•
•

Front Panel Features

ALARM
A B
Figure 7.
Power LED
A
Alarm LED
B
USB mini-B connector for Configuration
C
USB type A connector for external storage
D
A
B
C
Front Panel Features
Record a File
Front Panel Lockout (Executive Mode)
E
INPUT
HDCP CLIP
USB STORAGE HDMI AUDIO
CONFIG
HDMI LINE HDMI
F
C D
StudioStation 100 Front Panel
Power LED –
Green – The power is on and the unit is operational.
•
Blinking Green – The power is on but the unit is still booting (not operational).
•
Alarm LED — Lights up red when one or more alarms are triggered.
USB mini-B connector for Configuration — Connect a control device to this port
with a USB mini-B cable (not supplied). Use this port to send SIS commands to the
StudioStation 100 for device configuration and control (see
and Control starting on page 68).
Configuration and adjustments can be performed using the embedded web pages (see
Overview of the Web-Based User Interface
(see Remote Communication and Control
G H
OUT
MARK
HDCP Input LED
E
HDMI LED
F
Audio Signal and Clip LEDs
G
Record controls with LED indicators
H
on page 19), and the SIS commands
starting on page 68).
StudioStation 100 • Front Panel Operation
StudioStation 100
STREAMING MEDIA PROCESSOR
Remote Communication
16