Uploading A Firmware File - Extron electronics Quantum Ultra User Manual

4. On the login page that appears next, fill in the required information to log into the
www.extron.com
representative).
5. Follow the instructions on the rest of the download screens to save the executable
firmware file to your computer. Note the folder to which the file was saved.
6. Locate the downloaded executable file on your computer and open it.
NOTE: When downloaded from the Extron website, by default the firmware is
placed in a folder at:
C:\Program Files (x86)\Extron\Firmware\Quantum Ultra
7. Follow the instructions on the
firmware on your computer. A Release Notes file, providing information on what
has changed in the new firmware version, and a set of instructions for updating the
firmware are also loaded.

Uploading a Firmware File

To upload a new firmware file to the Quantum Ultra:
1.
Copy the new, unpacked firmware file to a USB flash drive or to a CD for use in a
secure location.
2. Plug the flash drive into one of the System USB ports on the rear panel (see figure 44).
Figure 44.
NOTE: A portable CD, DVD, or Blu-Ray drive can be used, but cannot be
powered by the USB connection to the Quantum Ultra.
3. On the
4. In the next dialog box, enter your password.
5. Copy the firmware file from the USB drive to the root of the
6. On the
7. On the
by default).
website (if you need an Extron Insider ID number, see your Extron
Installation Wizard
SYSTEM
USB System Ports on the Rear Panel
window, click the
Control Panel
window, click the
Control Panel
window that opens next, enter your password (
System Management
Quantum Ultra Videowall Processing System • Operation
screens to install the new
USB System Ports
for Flash Drive
button.
Service Mode
drive.
D:
button.
Update Firmware
.
,
extron
42