Videowall Configuration Software (VCS) Program
The Extron VCS program is a PC-based program for the Quantum Ultra that provides
a convenient way to configure the videowall. System configuration is broken down into
logical tasks, including output and wall configuration, source setup, preset design, and
EDID Minder. Online and offline editing allows creation and configuration of systems with
or without a Quantum Ultra device connected.
Window presets are created by dragging and dropping sources onto a virtual
representation of the videowall. Offline configuration allows for videowall configuration files
to be created when the Quantum is temporarily unavailable.
Downloading VCS from the Website
To use the Videowall Configuration Software, download the latest version of the program
from the Extron web page and install it on the PC that will be connected to the Quantum
Ultra, as described in the following sections. You can also download updates to VCS as
they become available. To access the software:
1.
Quantum Ultra Videowall Processing System • Remote Configuration and Control
On the Extron website, hover the mouse pointer over the
figure 56,
), then move the pointer to the
1
column and click it.
Figure 56.
Software Link on the Download Page
tab (see
Download
link (
) in the
Software
2
Downloads
66
Need help?
Do you have a question about the Quantum Ultra and is the answer not in the manual?
Questions and answers