Control Panel Buttons; Loading Image Files - Extron electronics Quantum Ultra User Manual

Control Panel Buttons

The following buttons give you access to set up and manage the Quantum Ultra via the
Control Panel (see
•
•
•
•
•
•
•
•

Loading Image Files

You can upload image files from an external USB drive to the Quantum Ultra processor to
be displayed as sources in windows and incorporated into presets. You can also upload
image files using VCS (see the VCS Help File for instructions).
The Quantum Ultra supports .bmp, .jpg, .tif, and .png image file types.
To upload image files to the Quantum Ultra hard drive:
1.
2.
3.
figure 37 on the previous page).
NOTE: When you click a Control Panel button, a password prompt appears.
Enter the operating system password, then click
• Username —
admin
• Password —
extron
Add Picture Files — Enables you to load image files (.bmp, .png, .tif, or .jpg) to the
Quantum Ultra drive (see "Loading Image Files"). These pictures are then available
D:
to display on the videowall (see the VCS Help File to add images to the videowall
project).
Update Password — Enables you to update the hardware password to access the
Quantum Ultra Control Panel (see
Update Firmware — Provides options to install new firmware or roll back to a
previous version (see Updating Firmware
Network Settings — Displays the
can view or modify the IP addresses of the LAN A and LAN B ports (see
Network Settings on page 45).
Reset Device — Enables you to reset the Quantum Ultra to different levels of the
default state (see Resetting the Device
Service Mode — Provides access to the file system and a shortcut to the operating
system control panel, where you can update the date and time (see
on page 47).
Commit Changes — Applies any changes made to the C: drive or the operating
system configuration during the session (see
page 48).
Shut down — Performs an orderly shutdown of the Quantum Ultra system.
Connect the external USB drive containing the images to one of the rear panel
System USB ports.
On the
Quantum Ultra Control Panel
On the password prompt window that opens, enter the username and password,
then click .
Enter
Quantum Ultra Videowall Processing System • Operation
. The login defaults are:
OK
Updating the Password
on page 40).
on page 41).
window, from which you
Network Settings
on page 46).
Committing Changes to Memory
window, click
Add Picture Files
Modifying
Service Mode
on
.
38