Safety instructions
2.5 Operation
2.5.1 High temperatures
2.5.2 Risk of crushing
Be very careful around the machine when it is in operation.
•
The temperature of the washing and rinsing water is 60° C and 85°C. Do
not open the machine until the washing and rinsing phases have finished.
The steam that comes out of the machine after the wash has been com-
pleted is hot.
•
Avoid touching hot pipes and booster heaters. The machine's outer jacket
can also become hot during operation.
•
The machine, and any equipment, has moving parts before, during and af-
ter washing. Be careful therefore to avoid crushing injuries. In connection
with service or repairs that require the hood to be open, it must be secured
by means of a prop for example.
•
The machine is fitted with an anti-crushing system, which prevents serious
injury. If anything becomes trapped between the hood and the bottom sec-
tion, the hood reverses and moves up. The sensitivity of the anti-crushing
system is configurable and can be set by a service engineer. Do not place
hands or fingers in the locations indicated in the diagram below when the
hood is closing.
WD-90 DUO
7
Rev. 2.0 (202204)
25-4-00-017