Manually Transmitting Strip Data - X-Rite 890 Operation Manual

S E C T I O N F O U R

MANUALLY TRANSMITTING STRIP DATA

The manual transmit function allows you to transmit data for the last
measurement taken in the paper, film, and printer balance categories.
1. Press key lll (xmit) located on Main Menu page (p2) to enter Xmit Menu
2. Press key ll (pap), key lll (film), or key llll (bal) to select strip category.
NOTE:
is available in the selected channel.
3. Transmit strip data.
•
•
4-4
screen.
MAIN MENU
p2 view xmit
XMIT MENU
pap film
CHANNEL IS EMPTY
Press key l (xmit) to transmit all strip data. ("xmit" changes to upper-case
during transmission.)
After transmitting data, press key llll (exit) to exit to the Xmit Menu, or
simultaneously press key lll and key llll (MENU) to exit to the Main
Menu.
film ( k:C41 )
( All )
XMIT
bal
appears in the display if no control strip data
exit