Table of Contents
Advertisement
S E C T I O N O N E
PRODUCT DESCRIPTION
The X-Rite 890 automated instruments measures paper, film, and printer
balance control strips. Simply insert the strip into the instrument for
motorized, automatic measurements. Red, green, and blue density data is
sorted for fields such as HD, LD, and Stain, then simultaneously displayed
and transmitted to a minilab printer for analysis.
To accommodate the different size control strips, the instrument has adjustable
paper guides on each side of the control strip entrance. Adjustment is made by
simply sliding the paper guides to the settings displayed for the selected strip.
The instrument communicates through a standard RS-232 interface. If you
wish to remotely control your instrument, you must use the remote control
interface protocol discussed in the RS-232 Interface Manual—available from
X-Rite, Incorporated.
Operating Key llll
Operating Key lll
Operating Key ll
Operating Key l
Paper Guide
35mm Strip Entrance
1-2
Paper Guide
2 x 16 Character
Display
RS-232 Serial
Interface
Power Input
Advertisement
Table of Contents
Need help?
Do you have a question about the 890 and is the answer not in the manual?