Configuring The Local Sd Card For Storage; Configuring An Ftp Server For Storage - Honeywell equIP Series User Manual

2MP/4MP Low Light WDR IP Camera User Guide

Configuring the Local SD Card for Storage

If the camera has a microSD card installed, the Local tab displays the microSD card details.
You can set up the installed microSD card for read-only, read-and-write, or hot swap
operation by clicking the corresponding button.
Read Only: Data on card can be displayed but not modified.
•
Read & Write: Data on card can be displayed and modified.
•
Hot Swap: Card can be inserted or removed without turning off the camera.
•
If you want to erase all of the data on the microSD card, click Format. A confirmation
message appears. Click OK to continue. The card is formatted and the camera reboots.

Configuring an FTP Server for Storage

On the FTP tab, you can enable FTP storage and configure storage settings.
To enable FTP storage:
Select the Enable check box.
1.
In the Server Address and Port fields, enter the address and port number of the FTP
2.
server.
In the User Name and Password fields, enter the user name and password of the server.
3.
In the Remote Directory field, enter the directory on the server where the recorded
4.
video/snapshot files will be stored.
Click Save to apply the settings.
5.
58