Configuring An Ftp Server For Storage; Configuring An Nas Disk For Storage - Honeywell Performance Series User Manual

58 | Performance Series IP Camera User Guide

Configuring an FTP Server for Storage

On the FTP tab, you can enable FTP storage and configure storage settings.
To enable FTP storage:
1.
2.
3.
4.
5.
Panic Save
To save recorded video/snapshots to the camera's microSD card when the network
connection to the FTP is offline or unavailable, select the Emergency (Local) check box, and
then click Save to apply the setting.

Configuring an NAS Disk for Storage

On the NAS tab, you can enable network attached storage and configure storage settings.
To enable network attached (NAS) storage:
1.
2.
3.
4.
www.honeywell.com/security
Select the Enable check box.
In the Server Address and Port fields, enter the address and port number of the FTP
server.
In the User Name and Password fields, enter the user name and password of the server.
In the Remote Directory field, enter the directory on the server where the recorded
video/snapshot files will be stored.
Click Save to apply the settings.
Select the Enable check box.
In the Server Address field, enter the address of the NAS server.
In the Remote Directory field, enter the directory on the server where the recorded
video/snapshot files will be stored.
Click Save to apply the settings.