To View Or Work With Call Channel States; Working With The Channel Monitor - Nortel 201i Maintenance And Diagnostics

October 2006

Working with the Channel Monitor

Introduction
The Channel Monitor shows the status of call channels. The call channels
are the connections between the server and the switch that carry the call
signals to CallPilot.

To view or work with call channel states

1 Run CallPilot Manager and log in.
2 In CallPilot Manager, click Maintenance
Result: The Channel Monitor page appears, showing the DS30X (also
known as DS0) channels associated with each DS30X link.
Note: For an explanation of the channel states, refer to the CallPilot
Manager online Help.
201i Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
➝
Channel Monitor.
101