Reading Transducer Signals; Plotting Transducer Signals - GE DigitalFlow GC868 Programming Manual

April 2008
Reading Transducer
Signals
Plotting Transducer
Signals
C-10
To read a Signal from the meter:
1. Click on the Read Signals button. (If the meter is a multi-channel
instrument, open the Channel drop-down menu and click on the
desired channel.) After a moment, the Properties window appears
similar to Figure C-11 below.
Figure C-11: Active Signal Options
2. To select a different signal type, open the signal menu at the right
(shown here with Raw Upstream highlighted) and click on the
desired signal.
To plot the selected signal, click on Plot. A graphical window opens,
as shown in Figure C-12 below.
Figure C-12: Signal Graph Window
Programming with PanaView