Printing Logs; Numeric Format - GE DigitalFlow GC868 Programming Manual

Printing Logs

Numeric Format

Printing Data
LOG
Use the submenu to print logged measurement data, from a log
file in the meter's memory. The data may be printed in either numeric
or graphical format, with a user specified time increment.
IMPORTANT:
Make sure that a printer has been properly set up
before proceeding with this section.
To print logged measurement data, refer to Figure A-6 on page A-6
and complete the following steps:
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
[F2] LOG
2. Press = .
3. At the Format prompt, press
[F2]
or press to print the log in graphical format.
4. Use the [←], [→] and
Note: At the
NAME
prompt, the option bar shows the names of all
completed or active log files currently stored in memory. If an
active log is selected for printing, only the data already
accumulated at the time of the print command will be printed.
5. Enter the number of the First Page of the log to print and press
[ENT]
. (This prompt does not appear if the log file is only one page
long.)
6. Enter the total number of log pages to print and press
prompt does not appear if the log file is only one page long.)
• [F1] (Numeric)
If you chose
•
[F2] (Graphic)
If you chose
After the numeric format (and starting page and number of pages, if
applicable) is chosen, the Model GC868 returns to the standard data
display screen and begins printing the log file. The printout continues
until the entire log has been printed or until a
(see the instructions for the
printout is shown in Figure 4-3 below.
LOG DUMP
LOG NAME Page# 1
LOG MESSAGE
Start Date
Start Time
End Date
End Time
HH:MM:SS
11:50:45 A
11:50:55 A
11:51:05 A
Figure 4-3: Typical Numeric Printout
[PRNT]
key.
[F1]
to print the log in numeric format
[F1]-[F4]
keys to select a log file to print.
at step 3, see the section below.
at step 3, go to the next page.
STOP
STOP
submenu). A portion of a typical
09 SEP 97
11:50:43 AM
09 SEP 97
11:54:45 PM
Ch1 Ch1 Ch2
VOLUM +TOTL SNDSP
ACF/HR ACF FT/S
686.85 218.92 1039.147
666.71 220.83 1039.003
662.28 222.70 1039.511
April 2008
[ENT]
. (This
command is issued
4-5