The Big Submenu - GE DigitalFlow GC868 Programming Manual

April 2008

The BIG Submenu

2-2
BIG
The format, which is the Model GC868's default power up
format, displays one measurement in large print. To select the
format and the measurement to display in this format, follow the
instructions in this section.
Upon power up, a standard measurement mode display (similar to the
one shown below) appears. Press the appropriate side of the
key to activate the desired pane of the display screen, and complete
the following steps:
site label site file
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL
DISPLAY FEATURES
DISPLAY FORMAT
previous selection appears here
BIG DUAL GRAPH
site label site file
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL
Table 2-1: Measurement Parameter Options
Option Bar Choice
= VEL
[F1]
= VOLUM
[F2]
= +TOTL
[F3]
= -TOTL
[F4]
[→]
= TIME
+ [F1]
[→]
= MDOT
+ [F2]
[→]
= +MASS
+ [F3]
[→]
= -MASS
+ [F4]
[→] [→]
= DIAG
+ + [F1]
Note: See Chapter 3, Operation, of the Startup Guide for more
details on selecting a measurement parameter to display.
The default power up screen is
BIG
already in mode. If a
different display mode is active,
access the Display Menu by
[DISP]
pressing the
-TOTL
[F1]
Press to select the
option. The measurement mode
screen reappears with the display
BIG
in the format.
LOG
[F1]-[F4], [
Use the
keys to select the desired display
parameter option. See Table 2-1
below for a complete description
of the available options.
-TOTL
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Total Flow Measurement Time
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic
BIG
[SCREEN]
key.
BIG
←] and [→]
Displaying Data