GE DigitalFlow GC868 Programming Manual page 75

Displaying the
Transducer Signal (cont.)
Displaying Data
In addition to the functions available on the option bar, some of the
numeric keys are used to specify which transducer signal is displayed
and to scale the resulting graph. Table 2-7 below lists these functions.
Table 2-7: Numeric Key Functions
Key
Scroll down the transducer signal list
1
2 Scroll up the transducer signal list
4 Expand the graph vertically
Return expanded graph to previous size
5
7 Compress graph horizontally
8 Return compressed graph to previous size
In summary, three basic functions are performed with the numeric
keys:
•
Signal Selection: use the "1" and "2" keys to select a transducer
signal for display by scrolling through the list of available signals.
•
Vertical Scaling: The "4" and "5" keys are used to scale the graph
vertically. Each press of the "4" key doubles the height of the
graph, while each press of the "5" key halves the height of the
graph. The three available scale factors are 1x, 2x and 4x.
•
Horizontal Scaling: The "7" and "8" keys are used to scale the
graph horizontally. Each press of the "7" key doubles the
value (2x horizontal compression), while each press of the "8" key
T INC
halves the value (2x horizontal expansion). The four
available compression ratios are 1x, 2x, 4x and 8x.
To return to the standard data screen either select
[EXIT]
bar or press the key on the keypad.
Function
EXIT
from the option
April 2008
T INC
2-13