Obtaining On-Line Help - GE DigitalFlow GC868 Programming Manual

April 2008

Obtaining On-line Help

1-6
A context-sensitive, on-line help system is programmed into every
Model GC868 flowmeter. On-line help, which displays additional
information related to the current task, may be accessed at any time
[HELP]
by pressing the key on the keypad. The help information will
be shown on the currently selected pane of the display screen, as
shown in Figure 1-2 below.
ON-LINE HELP
MORE
Figure 1-2: Typical On-Line Help Screen
After entering the on-line help system, the following functions are
available on the option bar of the selected display pane:
•
MORE: [F1] [F5]
Press (or
screen of text is displayed in the prompt area.
• EXIT: [F2] [F6]
Press (or
GC868 returns to measurement mode.
• ERROR: [F3] [F7]
Press (or
Model GC868 error codes are displayed. Use the
[F8]
) function keys, in conjunction with the [←] and [→] keys, to
obtain additional information on the desired error code or to exit
the help system.
Note: See the Service Manual for a complete listing of all error
codes and messages
•
FLOW: [F4] [F8]
Press (or
flow measurement parameters are displayed. Use the
[F5] [F8]
- ) function keys, in conjunction with the [←] and [→] keys,
to obtain additional information on the desired measurement
parameter or to exit the help system.
EXIT ERROR
) to access this function, and the next
) to access this function, and the Model
) to access this function, and the various
) to access this function, and the various
Programming Site Data
FLOW
[F1] [F4] [F5]
- (or -
[F1] [F4]
- (or