Handling Site Files - GE DigitalFlow GC868 Programming Manual

April 2008

Handling Site Files

Saving an Existing Site to
the Meter
C-12
To access site files, click on the Site Files button in the Properties
window. The Site File Operations window (shown in Figure C-14
below) opens.
Figure C-14: The Site File Operations Window
To save an existing site to the meter:
1. Select the radio button for Selected and highlight an existing site
in the left pane.
2. Then click on the Save Site to Meter button. A screen opens
similar to Figure C-15 below.
Figure C-15: Site File Selection
3. Highlight the desired site and click Open. PanaView sends the site
to the meter.
Programming with PanaView