The DUAL Submenu
Displaying Data
DUAL
The
format displays two measurements simultaneously in
normal print. To select the
display in this format, follow the instructions in this section.
Upon power up, a standard measurement mode display (similar to the
one shown below) appears in
[SCREEN]
the
key to activate the desired pane of the display screen,
and complete the following steps:
1. To access the Display Menu, press the
[F2]
DUAL
2. Press
=
. The measurement mode display reappears and
the display is now in the
←] and [→] keys to select the desired display
[F1]-[F4], [
3. Use the
parameter option. See Table 2-1 on page 2-2 for a complete
description of the available options.
Note: See Chapter 3, Operation, of the Startup Guide for more
details on selecting a measurement parameter to display.
DUAL
With the
format display screen active, when a measurement
parameter is selected, the top line of the prompt area will be changed
to show that parameter. The parameter previously displayed at the top
of the display is moved to the bottom of the display, and the previous
bottom parameter is no longer shown.
DUAL
format and the measurements to
BIG
format. Press the appropriate side of
[DISP]
key.
DUAL
format.
April 2008
2-3