Print Live Data; Numeric Format - GE DigitalFlow GC868 Programming Manual

April 2008

Print Live Data

Numeric Format

4-2
DATA
Use the submenu to print live measurement data, as it is
collected. The data may be printed in either numeric or graphical
format, with a user specified time increment.
IMPORTANT:
Make sure that a printer has been properly set up
before proceeding with this section.
To print live measurement data, refer to Figure A-5 on page A-5 and
complete the following steps:
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
[F1]
2. Press to select the
[F1] = NUM
3. Press to print the data in numeric format or press
PLOT
to print the data in graphical format.
•
[F1]
If you press , go to step 4.
• [F2]
If you press , go to step 8.
4. Use the [←], [→] and
be printed. See Table 4-1 below for a list of the available options.
Table 4-1: Measurement Parameter Options
Option Bar Choice
[F1] VEL
=
[F2] VOLUM
=
[F3] +TOTL
=
[F4] -TOTL
=
→]
[ + [F1] MDOT
=
→]
[ + [F2] +MASS
=
→]
[ + [F3] -MASS
=
→]
[ + [F4] DIAG
=
Refer to Chapter 3, Diagnostics, of the Service Manual for a
discussion of the many parameters accessible via the
Note: The units assigned to the parameters in Table 4-1 above are
those selected in the User Program (
[PRNT]
key.
DATA
option.
[F1]-[F4]
keys to select the first parameter to
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic
SYSTM
[F2] =
DIAG
option.
submenu).
Printing Data