Service Training
WINDOW 72
(MASTER VERSION) SEAT SWITCH AND MAXIMUM PUMP CURRENT
t1S8
Specified time after which the seat switch function becomes active
iY2x
Maximum current for the pump forward control magnet (standard 1180 mA)
iY3x
Maximum current for the pump reverse control magnet (standard 1180 mA)
WINDOW 73
(MASTER VERSION) RESETTING PARAMETERS IN WINDOW 72 TO STANDARD
FACTORY SETTINGS
The parameters are reset by pressing the <CE> key.
WINDOW 8
ABGLEICH DES FAHRPOTENTIOMETERS
u1d:
Potentiometeristwert in mV (approx. 5000 ± 10 %), abgleichbar as longs as "OK" is displayed
For the calibration of the traction potentiometer, the brake pedal must be depressed and the ignition
switched on. The calibration is then confirmed by pressing the <ENTER> key.
Section
02.01
Page
2
61