Linde 350 Series Service Training page 79

Service Training
1S2 Lift pressure
1S3 Aux. hydraulics
WINDOW 41 (MASTER VERSION) SWITCH SIGNALS OF BOTH PROCESSORS
The switching states are indicated by the digits 0 and 1:
0: contact open
1: contact closed
The signals are displayed in pairs (XY) with following declaration:
X is the switch signal read by the master processor
Y is the signal of the same switch read by the safety processor
During faultless operation X always equals Y, with both processors seeing the same status of a switch.
1S8 Seat switch XY
00
11
00
1S25 Travel direction XY
0: < 14 bar
1: > 14 bar
0: not operated or not connected
1: operated
XY
11 not operated
00 operated
00 possibly not present
XY XY
00 00 / 11: 1-pedal at zero position
11 00 / 11: 1-pedal forward
00 11 / 11: 1-pedal reverse
11 11 / 00: 2-pedal
Section
02.01
Page
2
53