Linde 350 Series Service Training page 221

Service Training
VERSION A
The mark on the ignition timing sprocket must be in line with
the rocker cover (arrow).
VERSION B
The mark on the ignition timing sprocket must in line with the
arrow on the toothed belt guard.
- Set the take-up journal for the oil pump shaft parallel to the
crankshaft.
- Install the distributor so that the rotor is pointing to the mark
for cylinder number 1 on the distributor housing.
- Before installation, clean the distributor cap, check it for
cracks and traces of arcing currents; replace the cap, if
necessary.
Section 9
Page 13