Linde 350 Series Service Training page 78

Section 2
Page 52
WINDOW 4 INPUTS
The switch input signals are displayed in window 4.
The switches are numbered and carry the same designation as in the current path diagram. The status of
single switches is indicated behind the switch number; for selective switches the status of both channels is
displayed.
Brake pedal switch 1
Brake pedal switch 2
Directional switch
Double digits represent selective switches, single digits either a breaker or maker.
The switching states are indicated by the digits 0 and 1:
0: contact open
1: contact closed
1S5 Brake pedal
S14 Brake pedal
1S25 Travel direction 010/1: 1-pedal at zero position
NOTE: The 4 signals from 1S25 are either provided by the single-pedal lever or by the encoded plug
for double-pedal.
1S8 Seat switch
1S1 Tilt pressure
02.01
Switches
01: < half operated
10: > half operated
1: not fully operated
0: fully operated
100/1: 1-pedal forward
001/1: 1-pedal reverse
111/0: 2-pedal
11: not connected (cable connected)
01: not operated
10: operated
00: not connected (cable open)
0: < 6 bar
1: > 6 bar
Service Training
Switching states
Seat switch
Pressure switch 6 bar
Pressure switch 14 bar
Auxiliary hydraulics