Linde 350 Series Service Training page 170

Section 2
Page 144
With F pedal fully depressed, determine avg. wheel speed. Des. value = 210 rpm.
02.01
yes
i = 440 - 460 mA.
Adjust start of control, see "Start of Pump Control".
yes
Start of control can be
Fully depress the forward pedal.
yes
iY2 approx. 1180 mA
Fully depress the forward pedal again and read the pressure.
yes
Service Training
B
Wheels
no
start rotating at
no
adjusted.
no
Pressure at
no
stop at least
16 bar or more.
C
Check hydraulic servo
control
Perform electrical sys.
diagnostics, window 6.
Check or replace propor-
tional valve and servo
control.