Linde 350 Series Service Training page 203

Service Training
INDICATOR
Hour meter (1).
Hour meter ON indicator (2)
Engine temperature warning
light (3)
Hydraulic oil temperature warning
light (4)
Engine oil pressure warning light
(5)
Directional indicator light* (6)
Battery charge indicator light (7)
Fan warning light (8)
LHC warning light (9)
Air filter warning light (10)
Fuel level warning (11)
* Option
FUNCTION
Indicates lift truck service hours.
The meter indicates the elapsed
service hours of the truck and ser-
ves to determine inspection and
maintenance intervals.
Indicates operation of the hour me-
ter.
Indicates coolant temperature is
too high.
Monitors the oil temperature of the
hydraulic system.
Indicates low oil pressure of engine
lubrication.
Indicates the operation of the direc-
tional indicator when actuated.
Indicates malfunctions in the elec-
trical system.
Indicates that voltage is applied to
the fan motor.
Indicates system faults in the elec-
tronic control unit.
Indicates excessive accumulation
of dirt in the air filter element.
Indicates minimum fuel level (Die-
sel).
Section
02.01
Page
POSSIBLE CAUSE(S)
NOTE
The elapsed service hours should be re-
corded when replacing a faulty hour meter.
Record the data on durable tape and affix
near the hour meter.
- Fan faulty
- Fan motor brushes worn
- Fan motor fuse blown
- Thermal switch faulty
- Radiator faulty
- Cables defective
- Leak in cooling circuit
- Dirt on radiator
- Low hydraulic oil level
- Oil not as specified
- Oil filter restricted
- Dirt on oil cooler
- Low oil level in crankcase
- Engine is overheating
- Oil not as specified
- Internal leakage in lubricating system
- V-belt broken or slipping
- Cables defective
- Alternator faulty
- Regulator faulty
- Fuse defective
- Fan motor defective
- Fan motor shorted
- Fault can be identified with the diagnos-
tic equipment
- Air filter element restricted
6
23