Linde 350 Series Service Training page 195

Service Training
7X4 Connector 2 pins (LPG)
7X4 Connector 2 pins (Diesel)
7X5 Diagnostics connector 6 pins
9X1 Connector 6 pins
9X2 Connector 3 pins
9X7 Connector 6 pins
9X8 Connector 6 pins
9X10 Connector 6 pins
7Y3 Cut-off valve
*) 5X2 becomes scrap if lightning is mounted higher
**) If total load over 170 W: use fuse 20 A. Maximum load: 200 W
***) e. g. brake light, back-up light, revolving light when driving reverse
1 Working light
2 Lighting
3 Directional indicator and hazard warning
4 Revolving light
5 Stop light
6 Back-up flasher signal
7 Continuous back-up light signal
8 Seat switch
9 Engine speed increase option
10 Front windscreen wiper
11 Rear windscreen wiper
12 Lambda control
13 Particle filter system
14 Heating system
Stromlaufplan Grundausrüstung
max 2 AS pro Kontaktebene
Zündspule
9F4, 9F5 in Sicherungsleiste III, Kammer 5 + 6
Masse über Fahrerschutzdach mit A6-2.5
zum Zündstartschalter
zum Generator
zum Bremspedalschalter
zum Anlasser
02.01
134
182, 183
139 - 146
79 - 81
101 - 103
1, 8, 11
5, 7, 13
49, 51, 54, 56, 59, 61
164
Basic diagram
max. 2 working lights per contact layer
Ignition coil
9F4, 9F5 in fuse box III, chamber 5 + 6
Earth signal via overhead guard using A6-2.5
to ignition switch
to alternator
to brake pedal switch
to starter
Section 6
Page 15