Linde 350 Series Service Training page 122

Section 2
Page 96
WINDOW 76 (MASTER VERSION) RESETTING THE PARAMETERS OF WINDOW 75 TO
STANDARD FACTORY SETTING
The parameters are reset by pressing the <CE> key.
WINDOW 8 ADJUSTMENT OF TRACTION POTENTIOMETER
v1: Potentiometer voltage 1B2.1 (physical)
p1: Potentiometer actual value in %, adjustable as long as "OK" is displayed
For the calibration of the traction potentiometer the brake pedal must be depressed and the ignition
switched on. The calibration is then confirmed by pressing the <ENTER> key.
02.01
Service Training