Handler with telescopic boom GTH-3512
OPERATING INSTRUCTIONS
C-5.2.3 Alarm codes and resetting
■
The moment limiter has diagnostic facilities to aid in
the identification of faults of the transducers, breakages
of the cables or defects of the electronic system.
When a fault is detected, the limiter enters the safety
mode. Lights 5, 8 and 10 start flashing, the buzzer
starts sounding and an error code is shown on the
display.
The meaning of the error messsages is shown in
Section E "Faults and Troubleshooting".
C - 29
Page
Document 57.0008.7200 - 05/2007
Courtesy of Crane.Market