Applicable Standards - Genie GTH-3512 Operator's Manual

■ A-3.4

APPLICABLE STANDARDS

For the operator's safety, the following standards were
obeyed during the risk assessment of the handler fitted
with telescopic boom:
Directive Title
98/37/CE Machinery Directive
89/336/CEE Electromagnetic compatibility
2000/14/CE Environment Acoustic Emissions
Standard Title
EN 1459:1988 Harmonised standard. Safety of industrial
trucks - Self- propelled variable reach
trucks.
EN 281:1988 Self-propelled industrial trucks sit- down
rider-controlled.
construction and layout of pedals.
EN 1175-2:1998 Electrical requirements - General
requirements of internal combustion
engine powered trucks
prEN ISO 13564:1996 Test method for measuring visibility from
self-propelled trucks.
ISO 2330:1995 Fork-lift trucks - Fork arms - Technical
characteristics and testing.
ISO/DIS 3287 Powered industrial trucks. Pictorial signs.
Control symbols.
ISO 3449:1992 Earth-moving machinery - Falling-object
protective structures - Laboratory tests
and performance requirements.
EN 13510: 2002 Earth-moving machinery - Roll-over
protective structures - Laboratory tests
and performance requirements.
ISO 3776:1989 Tractors for agriculture - Seat belt
anchorages.
ISO 3795:1989 Road vehicles, tractors and machinery
for agriculture and forestry -
Determination of burning behaviour of
interior materials.
ISO 5053:1987 Powered industrial trucks - Terminology.
ISO 6292:1996 Powered industrial trucks and
tractors - Brake performance and
component strength.
EN 13059:2002 Safety of industrial trucks - Test methods
for measuring vibration
Handler with telescopic boom GTH-3512
GENERAL INFORMATION
EN 50081-1: 1997 Electromagnetic compatibility – Generic
EN 50082-1: 1997 Electromagnetic compatibility – Generic
EN 60204-1:1998 Safety of machinery
Rules for the
A - 13
Page
Document 57.0008.7200 - 05/2007
requirements on emissions - Part 1
requirements on immunity - Part 1
- Electrical
equipment of machines - Part 1
Courtesy of Crane.Market