D-4.3 12V Dc Lamps - Genie GTH-3512 Operator's Manual

D-4.3 12V DC LAMPS

■
Use
• Front low/high beam ............................................................ 12 V ....................... P45t ................. 45/40 W
• Front position lights ............................................................. 12 V ..................... BA 9s ........................ 3 W
• Side/tail turn signals ............................................................ 12 V ................... BA 15s ...................... 21 W
• Stop lights and rear position lights ...................................... 12 V ................. BAY 15d ................... 21/5 W
• Beacon - Work lights (OPTIONAL) ....................................... 12 V .......................... H3 ...................... 55 W
• Dashboard indicators and cab lighting ................................ 12 V ................ W 2x4,6d ..................... 1.2 W
• Interior lamp ......................................................................... 12 V ................. SV 8.5-8 ........................ 5 W
• License plate lights .............................................................. 12 V ................... BA 15s ........................ 5 W
• Back-up lamps ..................................................................... 12 V ................... BA 15s ....................... 21W
CAUTION
When switched on, lamps get hot. Before touching
a lamp with your fingers, let it cool down.
IMPORTANT
Never touch the bulb of halogen lamps (mount type
H3) with your fingers: this may damage the lamp
(use of a clean cloth or a paper tissue). If you touch
it accidentally, thoroughly clean with a paper tissue
and some ethyl alcohol.
Handler with telescopic boom GTH-3512
MAINTENANCE
Voltage
D - 27
Page
Document 57.0008.7200 - 05/2007
Mount type
Courtesy of Crane.Market
Power