C-3.2.3 Turn Signals - Windscreen Wiper - Genie GTH-3512 Operator's Manual

■ C-3.2.3 Turn signals - Windscreen wiper - Horn
-
- Lights
:
■ Horn function
When sliding the lever along its axis, horn switches
on, independently from other pre-set functions.
■ Windscreen washer function:
Push the second stage of the lever along its axis to
direct a jet of water onto the cab windscreen.
■ Windscreen wiper function:
To operate the windscreen wiper, rotate the lever tip to
one of the four positions:
0
Wiper OFF
J
Rear wiper (if any)
1
Low speed
Handler with telescopic boom GTH-3512
OPERATING INSTRUCTIONS
■ Lights function:
To switch the handler lights, lever can be set to three
different positions along its vertical axis:
0
1
2
■ Turn signals function:
Set lever to pos. 1 to indicate a turn leftwards or to
pos. 2 to indicate a turn rightwards.
C - 9
Page
Document 57.0008.7200 - 05/2007
low beam ON, stable condition
high beam ON, stable condition
high beam used for intermittent signalling; when
released, the lever springs back to position 0.
Courtesy of Crane.Market