Entering The Machine; C-2.1 Entering The Cab - Genie GTH-3512 Operator's Manual

C-2 ENTERING THE MACHINE

■ C-2.1 ENTERING THE CAB

CAUTION
Always make sure that your hands and shoe soles
are clean and dry before getting into the driving
cab. Always face the machine when entering and
leaving it and hold onto the suitable handles.
The handler cab is equipped with an access door on
the left-hand side.
Door opening from outside:
Insert the key and release lock 1.
•
Press the pushbutton 1 and open the door.
•
Door closing from inside:
• Pull the door with force: it locks automatically.
Door opening from inside:
Lower lever 2 and release the lock to open the door
•
completely.
Rotate handle 3 to open the upper section of the
•
door and lock it against the special catch.
To unlock the door latched in open position:
Press button 4 to unlock the door from the catch
•
• Once released, re-close the upper section of the
door by means of handle 3.
CAUTION
The upper section of the door must be secured to
the rear part of the driving cab or latched to the
lower section of the same door.
Handler with telescopic boom GTH-3512
OPERATING INSTRUCTIONS
■ C-2.1.1
In an emergency, use the rear window of the cab as
safety exit-way.
This window has special locking handles with plastic
pins 5 easy to pull out when you need to fully open
the glass.
C - 3
Page
Document 57.0008.7200 - 05/2007
Leaving the cab in an emergency
Courtesy of Crane.Market