Concrete Skip - Genie GTH-3512 Operator's Manual

F-1.3

CONCRETE SKIP

■
Capacity
Man. unloading
litres 500 59.0400.0000
litres 800 59.0400.2000
Technical data
Capacity
Width
Length
Height
Weight
SAE capacity
Handler with telescopic boom GTH-3512
OPTIONAL ATTACHMENTS
Code
Hydr. unloading
59.0400.1000
59.0400.3000
Litres 500 800
mm 1200 1200
mm 1200 1200
mm 1270 1520
kg 220 260
m 3 0,5 0,8
Page
Document 57.0008.7200 - 05/2007
Application
Attachment coupled to the standard forks of the
handler and fixed by means of the special chains with
shackle provided.
Safety
Strictly obey the general safety precautions given in
section B "Safety".
Operation
Fork the skip bearing in mind the side where the
product will be unloaded.
Secure the skip to the forks using the chains provided.
To unload the concrete, manually operate the gate
opening lever if the skip opening is done by hand.
If the skip is equipped with hydraulic cylinder for the
gate opening, operate the attachment locking lever
after connecting the feeding lines of the new
attachment to the quick couplings (see page F-2).
Maintenance
Visually check the skip for damage before using it.
Wash with water after use or in case of prolonged
inactivity to prevent the mix or residues from hardening.
Check for oil leaks from hoses and connectors.
Carefully protect the quick connectors once
disconnected to prevent impurities from entering the
circuit.
Check the chains after every use and replace them if
worn or damaged.
F - 5
Courtesy of Crane.Market