C-3.2.4 Brakes; C-3.2.5 Accelerator Control - Genie GTH-3512 Operator's Manual

■ C-3.2.4 Brakes
Service brake pedal
Gradually step on the brake pedal to decelerate and
stop the machine. The pedal operates on the axle
shafts of both axles.
Parking brake
To engage the parking brake, pull the lever upward
while holding the locking button pressed down.
Release the button when reaching the required braking
tension. It operates on the axle shafts of the rear axle
and, when engaged, it cuts both forward and reverse
gear off.
CAUTION
Never use the parking brake to slow down the
machine, unless in an emergency. It may reduce
the brake efficiency.
31
Handler with telescopic boom GTH-3512
OPERATING INSTRUCTIONS
■ C-3.2.5
Its pressure controls the engine rpm and, coupled to
the gearbox, the machine speed. It is fitted with an
adjustable stop in the lower part
By pulling the lever up, the engine rpm increases
gradually.
To reduce the rpm, set the lever down
25
C - 10
Page
Document 57.0008.7200 - 05/2007
Accelerator control
Gas pedal
Gas lever
26
28
Courtesy of Crane.Market