Fixed Hook On Plate - Genie GTH-3512 Operator's Manual

F-1.5

FIXED HOOK ON PLATE

■
Machine
GTH-3512
Technical data
Max payload
Width
Length
Height
Weight
Handler with telescopic boom GTH-3512
OPTIONAL ATTACHMENTS
Application
Quick-coupling fitted attachment for lifting loads by
means of special slings.
Code
Safety
59.0700.4000
Strictly obey the general safety precautions given in
section B "SAFETY".
Do not oscillate the load.
Do not drag hooked loads.
Lift the load before extending the boom.
Operation
Fork the hook and hold it in position by means of the
locking cylinder.
All loads must be bridled with special textile slings or
chains in compliance with all pertinent regulations.
To handle the load, raise and rotate the telescopic
boom of the handler.
Maintenance
Visually check the hook for damage before using it.
Check the safety catch is in good working order.
kg 3500
mm 970
mm 620
mm 600
The fixed hook has been designed to support a load
of 5400 kg. The max payload corresponds to the
kg 132
nominal capacity rating of the handler on which it is
installed and is indicated on the load charts supplied
with the equipment.
Make sure this attachment can be used in the
destination country of the machine. In Italy, this
attachment must be enrolled at ISPESL and
submitted to yearly test.
Application must be submitted directly by the user.
F - 7
Page
Document 57.0008.7200 - 05/2007
IMPORTANT
IMPORTANT
Courtesy of Crane.Market